| Choose CAD format here: |
| Download here:
So laden Sie CAD-Dateien für dieses Produkt herunter
|
2-811 |
Vector 3 Central Locking T-handle
Index Code:Vector 3 T-handle for central locking vehicle applications. The unlock and lock signal is sent from the vehicle’s system. Available in versions with feedback if the T-bar handle is open or closed and if the handle is unlocked or locked.
The handle creates 4 mm compression and is sealed to IP65 for water and dust. Four blind-mount studs ensure waterproof assembly. In case of power failure, the latch is equipped with a mechanical override cylinder.
Available for 12- and 24-volt systems and with fixed or adjustable roller cams, as well as 1-, 2- and 3-point latching options.
| Zunge einstellbar | Zinkdruckguss, passiviert |
|---|---|
| Mulde | Polyamid glasfaserverstärkt (PA6GF30) |
| Eingegossene Bolzen | Stahl, schwarz passiviert |
| Cylinder | Zinkdruckguss; Kappe und Staubschutz: Edelstahl 304 |
| Staubkappe, schwarz | Polyamid glasfaserverstärkt (PA6GF30) |
| Griff | Stainless steel 304, polished or zinc die cast, black texture powder coated |
| Rollen | Polyamid glasfaserverstärkt (PA6GF30) |
| Rotating locking device | Edelstahl 303 |
| Gelenkdorn | Steel, zinc plated or stainless steel 303 |
| Additional | Electronic interface Power requirements 12VDC/2A or 24VDC/2A, lock/unlock by reverse polarity (impulse length 0,3-1,0 s). Optional sensor output Sensor 1 Handle unlocked – open circuit, handle locked – closed circuit (max 30VDC/500mA). Sensor 2 Handle open – open circuit, handle closed – closed circuit (max 30VDC/500mA, total max 10W). Opening rotation Two- and three-point cams combined with adapter cannot be used with handles with clockwise or 180º rotation. Using two- and three-point cams without adapter works with all opening rotations. The internal enclosure for the electronics inside the Vector T3 meets IP44 (tested with cable entry facing downwards). Maximum tightening torque 2,2 Nm. |
|---|---|
| Normen | IP65,DIN EN 61373 |
|
|
|
|
|
|
|
|
