ACTIONNEUR VECTOR P
L'actionneur Vector P est une poignée brevetée robuste et résistante aux vibrations, conçue pour les véhicules tout-terrain et sur route. La poignée de l'actionneur Vector P est utilisée pour manœuvrer un ou deux loquets rotatifs Vector, ou des points de verrouillage Vector connectés avec des câbles Vector entre la poignée de l'actionneur et le(s) point(s) de verrouillage Vector.
Il est disponible avec une poignée à prise à gauche, à droite ou universelle, et s'installe avec un support de montage ou quatre boulons M5. Étanchéité à l'eau et à la poussière IP66.
| Cylinder | Zinc die cast, stainless steel 304 cap and dust shutter |
| Nut | Steel, zinc plated |
| Mounting bracket | Steel, zinc plated |
| Gaskets | Polyurethane |
| Bracket | Steel, zinc plated |
| Cast-in bolts | Steel, zinc plated |
| Body | Glass fibre reinforced polyamide (PA6GF30) |
| Adapter for cylinder (internal component) | Glass fibre reinforced polyamide (PA6GF30) |
| Manoeuver arms | Zinc die cast, zinc plated |
| Standards | IP66, DIN EN 61373 |
| Cylinder information | Cylinder with other key codes on request, Supplied with two keys |
| Notes | The tightening torque of the two nuts for the mounting bracket is 3,0 Nm. The tightening torque of the four nuts for the mould-in bolts is 2,2 Nm. It is important that the four holes made in the cut out for the mould-in bolts are within tolerance, to avoid damage when tightening the M5 nuts. |
| Choisissez ici le format CAO: |
| Download here: |
|
2-835 |
|
|
|
|
|
|
|