| Cylinder | Zinc die cast, stainless steel 304 cap and dust shutter |
| Handle | Stainless steel 304, polished or zinc die cast, black texture powder coated |
| Roller | Glass fibre reinforced polyamide (PA6GF30) |
| Shaft | Steel, zinc plated or stainless steel 303 |
| Dust cover, black | Glass fibre reinforced polyamide (PA6GF30) |
| Cast-in bolts | Steel, black passivated |
| Rotating locking device | Stainless steel 303 |
| Body | Glass fibre reinforced polyamide (PA6GF30) |
| Adjustable cam | Zinc die cast, passivated |
| Standards | IP65, DIN EN 61373 |
| Additional | Electronic interface Power requirements 12VDC/2A or 24VDC/2A, lock/unlock by reverse polarity (impulse length 0,3-1,0 s). Optional sensor output Sensor 1 Handle unlocked – open circuit, handle locked – closed circuit (max 30VDC/500mA). Sensor 2 Handle open – open circuit, handle closed – closed circuit (max 30VDC/500mA, total max 10W). Opening rotation Two- and three-point cams combined with adapter cannot be used with handles with clockwise or 180º rotation. Using two- and three-point cams without adapter works with all opening rotations. The internal enclosure for the electronics inside the Vector T3 meets IP44 (tested with cable entry facing downwards). Maximum tightening torque 2,2 Nm. |
Downloads
| Name | Download | File type |
|---|---|---|
| Technical Information T3 Central Locking Handle-01.pdf | 689 KB |
More information
- Cylinder: Zinc die cast, stainless steel 304 cap and dust shutter
- Handle: Stainless steel 304, polished or zinc die cast, black texture powder coated
- Roller: Glass fibre reinforced polyamide (PA6GF30)
- Shaft: Steel, zinc plated or stainless steel 303
- Dust cover, black: Glass fibre reinforced polyamide (PA6GF30)
- Cast-in bolts: Steel, black passivated
- Rotating locking device: Stainless steel 303
- Body: Glass fibre reinforced polyamide (PA6GF30)
- Adjustable cam: Zinc die cast, passivated
- Standards: IP65 DIN EN 61373
-
Additional:
Electronic interface
Power requirements 12VDC/2A or 24VDC/2A, lock/unlock by reverse polarity (impulse length 0,3-1,0 s).
Optional sensor output
Sensor 1 Handle unlocked – open circuit, handle locked – closed circuit (max 30VDC/500mA).
Sensor 2 Handle open – open circuit, handle closed – closed circuit (max 30VDC/500mA, total max 10W).
Opening rotation
Two- and three-point cams combined with adapter cannot be used with handles with clockwise or 180º rotation.
Using two- and three-point cams without adapter works with all opening rotations.
Protection internal electronicsThe internal enclosure for the electronics inside the Vector T3 meets IP44 (tested with cable entry facing downwards).
Maximum tightening torque 2,2 Nm.