Vector P Dois Pontos de Travamento
Este fecho para aplicações severas está disponível com a alavanca no formato esquerdo, direito ou universal. Este fecho é montado em conjunto com um capturador de ø10mm tipo bate e fecha em dois pontos de travamento ao invés de um só no centro. Ideal para aplicações onde a porta e o quadro se movimentem, como em caminhões e equipamentos de construção fora de estrada.
Fornecido com cavalete para montagem traseira ou com quatro parafusos fundidos na carcaça. Grau de proteção contra água e pó IP66.
| Baixar PDF | Vector P Handle Types and Information |
| Cylinder | Zinc die cast, stainless steel 304 cap and dust shutter |
| Nut | Steel, zinc plated |
| O-ring | NBR |
| Manoeuver arms | Zinc die cast, zinc plated |
| Body, grip handle, sliding cam and adapter for cylinder (internal component) | Glass fibre reinforced polyamide (PA6GF30) |
| Mounting bracket, mould-in bolts, maneuver mechanism and striker used inside sealed area | Steel, zinc plated |
| PUR gasket | Polyurethane |
| Classifications | IP66 |
| Cylinder information | Cylinder with other key codes on request, Supplied with two keys |
| Notes | The tightening torque of the two nuts for the mounting bracket is 3,0 Nm. The tightening torque of the four nuts for the mould-in bolts is 2,2 Nm. It is important that the four holes made in the cut out for the mould-in bolts are within tolerance, to avoid damage when tightening the M5 nuts. When used in vibrating environments the latch shall be key-locked to ensure closed door position. |
| Escolha o formato CAD aqui: |
| Download here: |
|
2-832a |
|
|
|
|
|
|
|