INTELLICLAMP 3D
Intelliclamps are used to connect several units or building elements. Each Intelliclamp 3D consists of two interlocking halves, a bolt and a nut. The halves are mounted on the separate units, and as the bolt is tightened, the two units are perfectly aligned in the X-, Y- and Z-axis. Each half is mounted on the separate units using rivets or screws. Manufactured in die-cast zinc, either zinc plated or black texture coated. Available in two sizes: 50x50 mm and 40x80 mm.
VIEW PRODUCT

INTELLICLAMP 3D MULTIFUNCTIONAL CONNECTOR
This patent-pending solution enables perfect concealed alignment of several units, creating a great looking set. Each half of the connector is mounted on the inside corners of two units, where they stabilize the separate units at a 90º angle. When the connectors are then interlocked, they secure and align the units in the X-, Y- and Z-axis. Manufactured in die-cast zinc and glass fibre reinforced polyamide.
​VIEW PRODUCT

KLIMA-FLEX BRIDGE CLAMP WITH WING KNOB
Bridge clamp for closing doors and panels. Available in two versions: with M8- or M6-threaded wing knob.
​VIEW PRODUCT

KLIMA-FLEX BRIDGE CLAMP COMPACT
Bridge clamp for recessed closing doors and panels. Available with M6-threaded wing knob or hexagon screw with press nut.
​VIEW PRODUCT

KLIMA-FLEX BRIDGE CLAMP DUAL DOORS
Dual bridge clamp for closing doors and panels. One bridge clamp keeps panels on both sides of the frame in place. Available in two versions: with M8- or M6-threaded wing knob.
​VIEW PRODUCT

TEST PORT FOR HVAC APPLICATIONS
Allows the user to test the air pressure in a ventilation system without the need to open the door. The port is secured with screws on the surface of the door skins. The longer test port, for 100 mm thick doors, can easily be adapted to thinner doors by simply cutting it to the required length.
​VIEW PRODUCT

INSPECTION WINDOW CIRCULAR 1
Circular inspection window in transparent, impact-resistant polycarbonate. The window is equipped with an integrated gasket and is suitable for units with positive or negative pressure. The window is supplied in two halves that are assembled in the door. Simple mounting by using the included bolts and nuts. Manufactured with a polycarbonate/macrolone 6557 window and foamed polyurethane PUR gasket seal. Available for door thickness of 48 mm.
VIEW PRODUCT

INSPECTION WINDOW CIRCULAR 2
Circular inspection window in transparent polycarbonate. The window is equipped with gaskets on both sides and is suitable for units with positive or negative pressure. Simple mounting using six self-tapping screws. Mounting screws are included. Manufactured with a polycarbonate window and PVC seal. Available for door thicknesses between 30–60 mm.
​VIEW PRODUCT

INSPECTION WINDOW SQUARE
Square inspection window in transparent, impact-resistant polycarbonate. The window is equipped with an integrated gasket and is suitable for units with positive or negative pressure. Simple mounting by using eight self-tapping stainless screws. Mounting screws are included. Water- and dustproof according to IP66. Manufactured with a UV-stabilized polycarbonate window and foam rubber EPDM seal. Available for door thicknesses between 40–60 mm.
​VIEW PRODUCT

INSPECTION WINDOW RECTANGULAR
Rectangular inspection window in transparent polycarbonate. The window is equipped with gaskets on both sides and is suitable for units with positive or negative pressure. Simple mounting using ten self-tapping screws. Mounting screws are included with the product. Manufactured with a polycarbonate window and PVC seal. Available for door thicknesses between 30–60 mm.
​VIEW PRODUCT

HVAC LIGHT FOR INSPECTION WINDOW
Practical, powerful lighting solution that can be used with Industrilas Inspection Window Square. It consists of a rigid plastic housing with tailored TPE seal. The circuit board is equipped with 6 white LEDs that are powered by 2 AAA batteries in an integrated battery compartment. High-quality batteries are included. 
Pressing the switch lights up the LEDs for 30 seconds. This prevents the batteries from being drained unintentionally. Alternatively, an external power supply can be soldered onto the circuit board. The power supply should provide 500 mA at 5V. A cable passage is provided on the seal. 
The LED unit is for indoor HVAC units and can be mounted in four positions on the viewing window. Screws for different door thicknesses are included
​VIEW PRODUCT