| Choose CAD format here: |
| Download here:
如要下载此产品的 CAD 文件
|
2-811 |
Vector T3 Central Locking Handle
Index Code:Vector 3 T-handle for central locking vehicle applications. The unlock and lock signal is sent from the vehicle’s system. Available in versions with feedback if the T-bar handle is open or closed and if the handle is unlocked or locked.
The handle creates 4 mm compression and is sealed to IP65 for water and dust. Four blind-mount studs ensure waterproof assembly. In case of power failure, the latch is equipped with a mechanical override cylinder.
Available for 12- and 24-volt systems and with fixed or adjustable roller cams, as well as 1-, 2- and 3-point latching options.
| 下载PDF | Product Data Sheet |
| Download PDF | Technical Information T3 Central Locking Handle-01.pdf |
| 可调锁舌 | 锌合金，钝化 |
|---|---|
| 锁体 | 尼龙6+30%玻纤 |
| 嵌入式螺柱 | Steel, black passivated |
| Cylinder | 锌合金，不锈钢304盖子和防尘片 |
| Dust cover, black | 尼龙6+30%玻纤 |
| 把手 | Stainless steel 304, polished or zinc die cast, black texture powder coated |
| 滑轮 | 尼龙6+30%玻纤 |
| Rotating locking device | 不锈钢 303 |
| 轴 | Steel, zinc plated or stainless steel 303 |
| Additional | Electronic interface Power requirements 12VDC/2A or 24VDC/2A, lock/unlock by reverse polarity (impulse length 0,3-1,0 s). Optional sensor output Sensor 1 Handle unlocked – open circuit, handle locked – closed circuit (max 30VDC/500mA). Sensor 2 Handle open – open circuit, handle closed – closed circuit (max 30VDC/500mA, total max 10W). Opening rotation Two- and three-point cams combined with adapter cannot be used with handles with clockwise or 180º rotation. Using two- and three-point cams without adapter works with all opening rotations. The internal enclosure for the electronics inside the Vector T3 meets IP44 (tested with cable entry facing downwards). Maximum tightening torque 2,2 Nm. |
|---|---|
| 标准 | IP65 DIN EN 61373 |
|
|
|
|
|
|
|
|
