×Contact电话:
+86(0)75527715486
E-mail:
orderchina@industrilas.com
Handle rotation 90° in both directionsOpening angle of hinges, applicable angle shown in numbersProfile cylinderRound cylinderBestLock cylinderScandinavian oval cylinderTool operated insertPadlock loop90° opening angle of hinges

Vector T3 Central Locking Handle

Index Code:
2-811

Vector 3 T-handle for central locking vehicle applications. The unlock and lock signal is sent from the vehicle’s system. Available in versions with feedback if the T-bar handle is open or closed and if the handle is unlocked or locked. 

The handle creates 4 mm compression and is sealed to IP65 for water and dust. Four blind-mount studs ensure waterproof assembly. In case of power failure, the latch is equipped with a mechanical override cylinder. 

Available for 12- and 24-volt systems and with fixed or adjustable roller cams, as well as 1-,  2- and 3-point latching options.

下载PDF
Product Data Sheet
Download PDF
Technical Information T3 Central Locking Handle-01.pdf
可调锁舌锌合金,钝化
锁体尼龙6+30%玻纤
嵌入式螺柱Steel, black passivated
Cylinder锌合金,不锈钢304盖子和防尘片
Dust cover, black尼龙6+30%玻纤
把手Stainless steel 304, polished or zinc die cast, black texture powder coated
滑轮尼龙6+30%玻纤
Rotating locking device不锈钢 303
Steel, zinc plated or stainless steel 303
Additional

Electronic interface

Power requirements 12VDC/2A or 24VDC/2A, lock/unlock by reverse polarity (impulse length 0,3-1,0 s).

Optional sensor output

Sensor 1 Handle unlocked – open circuit, handle locked – closed circuit (max 30VDC/500mA).

Sensor 2 Handle open – open circuit, handle closed – closed circuit (max 30VDC/500mA, total max 10W).

Opening rotation

Two- and three-point cams combined with adapter cannot be used with handles with clockwise or 180º rotation.

Using two- and three-point cams without adapter works with all opening rotations.

Protection internal electronics

The internal enclosure for the electronics inside the Vector T3 meets IP44 (tested with cable entry facing downwards).

Maximum tightening torque 2,2 Nm.

标准IP65
DIN EN 61373
To download CAD-files, you need an Industrilas account. It only takes a minute.
or Create Account
Make your selections in each column to create your article number (AAAA-BCCDDEFG-HH)
AAAA 描述
2752Vector 3
B 款式
2Central locking 12 V
3Central locking 24 V
CC Cylinder
73Keyed alike 830
72Keyed alike 825
75Keyed alike 840
80Keyed alike 455
77Keyed alike 850
76Keyed alike 845
06相同钥匙 751
02不同钥匙
00无锁闭
68Keyed alike 805
71Keyed alike 820
70Keyed alike 815
69Keyed alike 810
DD Material handle/shaft 把手
23Zinc/Steel镀铬
26Zinc/Steel黑色
36SS304/SS303黑色
39SS304/SS303Polished
E Feedback signal
0No signal
1Open/closed + unlocked/locked
F Dust cover
0
G Opening rotation
290° counter clockwise
190° clockwise
0180°
HH Cam H= L=
04Adjustable three-point roller cam10-6160
05Adjustable single point roller cam10-6161
03Fixed three-point roller cam6685
01Fixed roller cam5861
02两点式锁舌--