DETAIL2011
DETAIL26642
DETAIL26643
DETAIL26646

Compression Handle 36-56 mm

Index Code 2-210
Padlock loop Universally right or left mounted Latch with compression function

Padlockable compression handle, with 6 mm compression. The C-dimension describes the compressed position. Indicated hole patterns in the table below are either Combi version, or the Ø 20 mm cut-out shown in the drawing.

Handle is available either for mounting by spacer nut (included) or rivets/screws (not included). 

Download PDFRecommended Tightening Torque
HousingZinc die cast, black powder coated
HandleGlass fibre reinforced polyamide (PA6GF30)
ScrewSteel, zinc plated
ShaftZinc die cast, black passivated
Spacer nutSteel, zinc plated
Choose CAD format here: INFO_TEXT
Download here:
3D CAD files are for reference only and are not a quality document. Errors may occur. Read full disclaimer

The 3D CAD models are provided as a design aid and for reference only. They are not a quality document and do not replace official product specifications, technical drawings or data sheets. Simplifications, inaccuracies or errors can occur, for example in dimensions, tolerances or details, and may also arise when files are converted between formats. Industrilås accepts no liability for errors in the CAD files or for any consequences of their use. Always verify critical dimensions against the current product documentation, or contact us if you are unsure.

CAD* P/N Description C= Cutout Drawing
275004-30 Handle for rivets/screws 36 mm 20 mm Ø (A) A
275004-40 Handle for rivets/screws 46 mm 20 mm Ø (A) A
275004-50 Handle for rivets/screws 56 mm 20 mm Ø (A) A
275006-30 Handle with spacer nut 36 mm Combi (B) B
275006-40 Handle with spacer nut 46 mm Combi (B) B
275006-50 Handle with spacer nut 56 mm Combi (B) B

For handle version using spacer nut

The hole diameter in the inner door skin should be Ø 28 mm for the spacer nut to fit through.