| Choose CAD format here: |
| Download here:
Se quer baixar arquivos CAD para este produto
|
2-811 |
Vector T3 Central Locking Handle
Index Code:Vector 3 T-handle for central locking vehicle applications. The unlock and lock signal is sent from the vehicle’s system. Available in versions with feedback if the T-bar handle is open or closed and if the handle is unlocked or locked.
The handle creates 4 mm compression and is sealed to IP65 for water and dust. Four blind-mount studs ensure waterproof assembly. In case of power failure, the latch is equipped with a mechanical override cylinder.
Available for 12- and 24-volt systems and with fixed or adjustable roller cams, as well as 1-, 2- and 3-point latching options.
| Baixar pdf | Product Data Sheet |
| Download PDF | Technical Information T3 Central Locking Handle-01.pdf |
| Lingueta ajustável | Zinc die cast, passivated |
|---|---|
| Body | Glass fibre reinforced polyamide (PA6GF30) |
| Parafusos injetados | Steel, black passivated |
| Cylinder | Zinc die cast, stainless steel 304 cap and dust shutter |
| Dust cover, black | Glass fibre reinforced polyamide (PA6GF30) |
| Maçaneta | Stainless steel 304, polished or zinc die cast, black texture powder coated |
| Roller | Glass fibre reinforced polyamide (PA6GF30) |
| Rotating locking device | Aço inox 303 |
| Eixo | Steel, zinc plated or stainless steel 303 |
| (AAAA)(Type) | (2752)(Vector 3) |
|---|---|
| (B)(Type) | (2)(Central locking 12 V),(3)(Central locking 24 V) |
| (CC)(Cylinder) | (02)(Keyed to differ),(06)(Keyed alike 751),(68)(Keyed alike 805),(69)(Keyed alike 810),(70)(Keyed alike 815),(71)(Keyed alike 820),(72)(Keyed alike 825),(73)(Keyed alike 830),(74)(Keyed alike 835),(75)(Keyed alike 840),(76)(Keyed alike 845),(77)(Keyed alike 850),(80)(Keyed alike 455) |
| (DD)(Material handle / shaft)(Handle) | (23)(Zinc / Steel)(Chrome),(26)(Zinc / Steel)(Black),(36)(SS304 / SS303)(Black),(39)(SS304 / SS303)(Polished) |
| (E)(Feedback signal) | (0)(No signal),(1)(Open / closed + unlocked / locked) |
| (F)(Dust cover) | (1)(Yes) |
| (G)(Opening rotation) | (0)(180°),(1)(90° clockwise),(2)(90° counter-clockwise) |
| (HH)(Cam)(H=)(L=) | (01)(Fixed roller cam)(58)(61),(02)(Two-point cam)(-)(-),(03)(Fixed three-point roller cam)(66)(85),(04)(Adjustable three-point roller cam)(10-61)(60),(05)(Adjustable single point roller cam)(10-61)(61) |
| Additional | Electronic interface Power requirements 12VDC/2A or 24VDC/2A, lock/unlock by reverse polarity (impulse length 0,3-1,0 s). Optional sensor output Sensor 1 Handle unlocked – open circuit, handle locked – closed circuit (max 30VDC/500mA). Sensor 2 Handle open – open circuit, handle closed – closed circuit (max 30VDC/500mA, total max 10W). Opening rotation Two- and three-point cams combined with adapter cannot be used with handles with clockwise or 180º rotation. Using two- and three-point cams without adapter works with all opening rotations. The internal enclosure for the electronics inside the Vector T3 meets IP44 (tested with cable entry facing downwards). Maximum tightening torque 2,2 Nm. |
|---|---|
| Classifications | IP65,DIN EN 61373 |
|
|
|
|
|
|
|
|
