Vision Swing Handle Standard for 40 mm profile cylinder

Name: Vision Swing Handle Standard for 40 mm profile cylinder
Availability: OutOfStock

Index Code:

1-002.12

Low profile swing handle for 40 mm cylinder and cam. Available in turn-to-latch version where the door is locked by turning the key.

DownloadsMaterialTechnical InformationTechnical Specifications

Download PDF	Product Data Sheet
Download PDF	Recommended Tightening Torque
Download PDF	Industrilas cut out versions

Dish	Zinc die cast, black coated or fibre glass reinforced polyamide (PA6GF30)
Dust cover	TPE
Handle	Zinc die cast, black coated or fibre glass reinforced polyamide (PA6GF30)
Pivot shaft	Zinc die cast, zinc plated

Specifications	Standard cams with negative bending are not possible to use with this swing handle (negative bended cam will interfere with escutcheon plate).

To download CAD-files, you need an Industrilas account. It only takes a minute.

A product number is created by combining the figures in each column (AAAAAABCD-EEEE)

B	Opening rotation
1	90° clockwise or counter-clockwise
2	90° counter-clockwise
3	90° clockwise

D	PDL
0	No

PDL = Spring loaded padlock loop retracts when handle is released.

	Round Rods pointed end (S-L) Steel (2-540)
	Round Rods with loop 15 mm rollers (R-L) Steel (2-541)
	Round Rods with Flat End (P) Steel (2-540)
	Round Rods for adapters 15 mm rollers (R) Steel (2-541)
	Round Rods for adapters 25 mm rollers (R) Steel (2-545)
	Round Rods pointed end (S-L) SS 304 (2-540)
	Round Rods for adapters 25 mm rollers (R) SS 304 (2-545)
	Round Rods for adapters 15 mm rollers (R) SS 304 (2-541)
	Round Rods with Flat End (P) SS 304 (2-540)
	Round Rods with loop 15 mm rollers (R-L) SS 304 (2-541)
	Round Rods with loop 25 mm rollers (R-L) SS 304 (2-545)
	Round Rod with loop 25 mm (R-L) Steel (2-545)

	Vision Three-Point cams Steel (1-008.51)
	Vision Two-Point cam Steel (1-008.51)
	Single-Point Cams Classic Steel (2-480)
	Single-Point Cams Classic SS 304 (2-480)
	Single-Point Cams Classic SS 316 (2-480)
	Vision Two-Point cam SS 304 (1-008.51)
	Vision Three-Point cams SS 304 (1-008.51)

	Vision Swing Handle Standard for 40 mm profile cylinder (1-002.02)
	Vision Swing Handle Standard for 45 mm profile cylinder (1-002.12)

Related products