Compression Handle 36-56 mm
Index Code:2-210
Padlockable compression handle, with 6 mm compression. The C-dimension describes the compressed position. Indicated hole patterns in the table below are either Combi version, or the Ø 20 mm cut-out shown in the drawing.
Handle is available either for mounting by spacer nut (included) or rivets/screws (not included).
| Download PDF | Product Data Sheet |
| Download PDF | Recommended Tightening Torque |
| Shaft | Zinc die cast, black passivated |
|---|---|
| Spacer nut | Steel, zinc plated |
| Handle | Glass fibre reinforced polyamide (PA6GF30) |
| Housing | Zinc die cast, black powder coated |
| Screw | Steel, zinc plated |
| Choose CAD format here:
To download CAD-Files for this product |
| Download here: |
To download CAD-files, you need an Industrilas account. It only takes a minute.
For handle version using spacer nut
The hole diameter in the inner door skin should be Ø 28 mm for the spacer nut to fit through.
